Polyethylene

3D 渲染 — PETRO STELLAR 产品媒体库

HDPE/LDPE/LLDPE 树脂，耐化学性优异、加工性良好，适用于薄膜、注塑、管材与容器；部分牌号符合食品接触要求。

索取报价分析

质量稳定，物理与机械性能优异。

提供注塑、吹塑、薄膜、管材等广泛牌号。

全球采购与供应，供货稳定。

HDPE (High Density Polyethylene) — Typical Properties & Grades

牌号	Application	MFI (190 °C / 2.16 kg) (g/10 min)	Density (23 °C) (g/cm³)	Tensile Stress at Yield (MPa)	ESCR (100% Igepal) (hr)	Main Standards
HBM 5020	Blow Molding	0.30	0.950	25	> 500	ISO 1133, ISO 1183, ISO 527-2, ISO 6916
HBM 5520	Blow Molding	0.25	0.955	28	> 500	ISO 1133, ISO 1183, ISO 527-2, ISO 6916
HBM 5510	Blow Molding	0.50	0.951	26	> 500	ISO 1133, ISO 1183, ISO 527-2, ISO 6916
EX3 (PE100)	Pipe Extrusion	0.45 ± 0.05 (190 °C / 5 kg)	0.945	26	> 500	ISO 1133, ISO 1183, ISO 4427, ISO 527-2
HFI 5110	Film / Blown Film	10 (190 °C / 21.6 kg) (HLM)	0.951	26	> 500	ISO 1133, ISO 1183, ISO 527-2, ISO 6916

⚠ Typical properties — not to be construed as product specifications. Refer to the respective PDS or COA.

牌号	Application	MFI (190 °C / 2.16 kg) (g/10 min)	Density (23 °C) (g/cm³)	Tensile Stress at Yield (MPa)	Elongation at Break (%)	Main Standards
Lupolen 2420H	Film / General Purpose	2.0	0.920	8	600	ISO 1133, ISO 1183, ISO 527-2
LFI 2047A	Film	4.7	0.920	9	700	ISO 1133, ISO 1183, ISO 527-2
LFI 2119	Film	1.9	0.921	8	700	ISO 1133, ISO 1183, ISO 527-2
LFI 2125A	Film	2.5	0.920	8	700	ISO 1133, ISO 1183, ISO 527-2
LFI 2130	Film	3.0	0.922	8	700	ISO 1133, ISO 1183, ISO 527-2
LIM 1922	Injection Molding	2.0	0.922	9	600	ISO 1133, ISO 1183, ISO 527-2

⚠ Typical properties — not to be construed as product specifications.

牌号	Application	MFI (190 °C / 2.16 kg) (g/10 min)	Density (23 °C) (g/cm³)	Tensile Stress at Yield (MPa)	Elongation at Break (%)	Main Standards
LL0209AA	Cast Film / Lamination	0.9	0.920	12	700	ISO 1133, ISO 1183, ISO 527-2
LEC1969	Extrusion Coating	0.9	0.919	12	700	ISO 1133, ISO 1183, ISO 527-2

⚠ Typical properties — not to be construed as product specifications.

相关产品