Analyses en direct issues du système d’information produits PETRO STELLAR — composition du portefeuille, couverture des grades et données techniques comparatives telles que publiées dans la proposition approuvée.
Produits publiés
Divisions produits
Lignes de spécification
Pages source de la proposition
Source : proposition approuvée, page 20. Valeurs typiques à titre indicatif.
| Property | Test Method | 40/50 | 60/70 | 85/100 | AC-30 | AC-40 | PG 64-22 | PG 70-22 | PG 76-22 |
|---|---|---|---|---|---|---|---|---|---|
| Penetration @ 25°C, 100 g, 5 s, 0.1 mm | ASTM D5 | 40 – 50 | 60 – 70 | 85 – 100 | – | – | – | – | – |
| Softening Point, °C (R&B) | ASTM D36 | 46 – 54 | 48 – 56 | 43 – 51 | – | – | – | – | – |
| Ductility @ 25°C, 5 cm/min, cm (Min.) | ASTM D113 | 100 | 100 | 100 | 15 | 10 | Report | Report | Report |
| Kinematic Viscosity @ 135°C, cSt (Min.) | ASTM D4402 | – | – | – | 250 (Min.) | 300 (Min.) | Report | Report | Report |
| Brookfield Viscosity @ 60°C, Pa·s | ASTM D4402 | – | – | – | 300 ± 60 | 400 ± 80 | Report | Report | Report |
| Flash Point, °C (Min.) | ASTM D92 | 230 | 230 | 230 | 230 | 230 | Report | Report | Report |
| Solubility in Trichloroethylene, % (Min.) | ASTM D2042 | 99.0 | 99.0 | 99.0 | 99.0 | 99.0 | Report | Report | Report |
| Loss on Heating, % (Max.) | ASTM D6 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | Report | Report | Report |
| Specific Gravity @ 25°C / 25°C | ASTM D70 | 1.01 ± 0.02 | 1.01 ± 0.02 | 1.01 ± 0.02 | 1.02 ± 0.02 | 1.02 ± 0.02 | Report | Report | Report |
| Penetration Index | ASTM D2270 | -1.0 to +1.0 | -1.0 to +1.0 | -1.0 to +1.0 | – | – | Report | Report | Report |
| After RTFOT — Mass Loss, % (Max.) | ASTM D2872 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | Report | Report | Report |
| After RTFOT — Ductility @ 25°C, cm (Min.) | ASTM D2872 | 75 | 75 | 75 | 15 | 10 | Report | Report | Report |
| PAV — Ductility @ 25°C, cm (Min.) | AASHTO R28 | – | – | – | – | – | 25 | 25 | 25 |
Source : proposition approuvée, page 6.
| Property | Unit | Limit (EN 590:2025) | Test Method |
|---|---|---|---|
| Cetane Number | - | min. 51.0 | EN ISO 5165 |
| Cetane Index | - | min. 46.0 | EN ISO 4264 |
| Density at 15 °C | kg/m³ | 815.0 – 845.0 (1) | EN ISO 12185 |
| Polycyclic Aromatic Hydrocarbons (PAH) | % m/m | max. 8 | EN 12916 |
| Sulfur Content | mg/kg | max. 10 | EN ISO 20846 |
| Flash Point | °C | min. 55 | EN ISO 2719 |
| Kinematic Viscosity at 40 °C | mm²/s | 2.000 – 4.500 | EN ISO 3104 / EN ISO 18335 |
| Distillation 95% (V/V) recovered at | °C | max. 360 | EN ISO 3405 |
| Distillation 85% (V/V) recovered at | °C | max. 325 | EN ISO 3405 |
| Distillation 65% (V/V) recovered at | °C | max. 250 | EN ISO 3405 |
| Distillation 10% (V/V) recovered at | °C | max. 205 | EN ISO 3405 |
| Distillation 5% (V/V) recovered at | °C | max. 180 | EN ISO 3405 |
| Division | Produit | Sous-titre / Nuances | Lignes de spécification |
|---|---|---|---|
| Refined Petroleum Products | Diesel Fuel EN590:2025 (10 PPM) | Automotive Gas Oil | 27 |
| Refined Petroleum Products | Jet Fuel A-1 | Aviation Turbine Fuel | 16 |
| Refined Petroleum Products | Gasoline — Motor Gasoline | Unleaded, BS EN 228:2025 Class A | 18 |
| Refined Petroleum Products | Fuel Oil HSFO / VLSFO | High Sulfur / Very Low Sulfur Fuel Oil | 14 |
| Refined Petroleum Products | Base Oil — Group III | 4 cSt · 6 cSt · 8 cSt | 3 |
| Crude Oil & Feedstocks | Crude Oil & Refinery Feedstocks | Various Grades | 4 |
| Crude Oil & Feedstocks | Naphtha & Condensate | Light Hydrocarbon Feedstocks | 22 |
| Gas & LPG Products | LPG — Propane / Butane 50:50 | Liquefied Petroleum Gas | 17 |
| Petrochemicals & Polymers | Polyethylene | HDPE · LDPE · LLDPE | 13 |
| Petrochemicals & Polymers | Polypropylene | PP Homopolymer · PP Random Copolymer | 13 |
| Petrochemicals & Polymers | Polyester & Vinyl Products | PET Resin · PVC Resin | 17 |
| Petrochemicals & Polymers | Polystyrene Products | GPPS · HIPS · EPS | 31 |
| Chemicals & Industrial Products | Methanol | Chemical / Petrochemical Grade | 21 |
| Chemicals & Industrial Products | Glycols | MEG · DEG · TEG | 27 |
| Chemicals & Industrial Products | Industrial Chemicals I | Caustic Soda · Sulfur · Urea | 37 |
| Chemicals & Industrial Products | Industrial Chemicals II | Ammonia · Acetic Acid · Formaldehyde | 20 |
| Bitumen & Infrastructure Products | Bitumen Grades | Road Construction & Industrial Applications | 13 |
