Polipropileno
Render 3D — biblioteca de medios de productos PETRO STELLAR
PP homopolímero y copolímero para empaques, fibras, componentes automotrices y bienes de consumo; excelente resistencia y estabilidad térmica.
Calidad constante y excelentes propiedades físicas y mecánicas.
Amplia gama de grados para inyección, extrusión, soplado, fibra y más.
Red global de producción y logística.
| Grado | Application | MFI (230 °C / 2.16 kg) (g/10 min) | Density (23 °C) (g/cm³) | Tensile Strength at Yield (MPa) | Flexural Modulus (23 °C) (MPa) | Main Standards |
|---|---|---|---|---|---|---|
| H120 GP/3 | Injection Molding | 12 | 0.905 | 35 | 1475 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| H1500 | Injection Molding | 3.0 | 0.905 | 36 | 1550 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| H1600 | Injection Molding | 1.5 | 0.905 | 37 | 1600 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| H2500 | Injection Molding | 25 | 0.905 | 31 | 1300 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| H5502 | Injection Molding | 50 | 0.905 | 30 | 1200 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| HP500N | Fiber | 12 | 0.905 | 39 | 1700 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| BOPP 230 | Film (BOPP) | 2.5 | 0.905 | 34 | 1500 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| Grado | Application | MFI (230 °C / 2.16 kg) (g/10 min) | Density (23 °C) (g/cm³) | Tensile Strength at Yield (MPa) | Flexural Modulus (23 °C) (MPa) | Main Standards |
|---|---|---|---|---|---|---|
| RCP100R | Injection Molding | 8.0 | 0.900 | 27 | 1100 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| RCP200R | Injection Molding | 5.0 | 0.900 | 28 | 1150 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| RCP300R | Injection Molding | 2.5 | 0.900 | 29 | 1200 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| RCP050R | Film / Sheet | 3.0 | 0.900 | 26 | 1050 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| RCP040R | Extrusion / Pipe | 0.3 | 0.900 | 24 | 1000 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
| RCP070R | Blow Molding | 0.8 | 0.900 | 25 | 1000 | ISO 1133, ISO 1183, ISO 527-2, ISO 178 |
